Aurorad 1000 g enamelled copper wire 0.04/0.07 0.65 0.2 0.5 0.8 mm 1.0 1.3 magnetic wire for electric coil winding of inductance coil relay (colour: 1.0 mm 1 kg, specification: copper)

Healthy common sense: the diameter related to the specifications of the enamelled wire refers to the diameter of the bare copper wire, except the thickness of the insulating paint. The measured with a brake calliper by the insulated diameter of the enamelled wire is the outer diameter, including the thickness of the insulating paint, and the measured size is usually larger than the size of the standard specification. The product in this link is a copper wire and the spool is included. There are different colours and bobbin sizes. Please know that copper wires of 1.3 mm and above specifications are relatively thick and cannot be straightened after the wound. The thickened shaft is not easy to damage. The wave holes at both ends are the same size and are more convenient to use. When the thin copper wire is wound, the coils should be placed upright so that the copper wire falls naturally and then wound. Please note: 1000 g 0.04 0.05 0.06 0.08 0.1 0.15 0.2 0.25 0.31 1.0 1.3 1.4 1.5 mm QA-1-155 EMALED copper wire magnetic coil winding high temperature 1 kg. QA-1 corresponds to 2UEW, and its insulation layer is polyurethane, which has a good direct weldability of 360 ~ 400. Main features: it has good direct welding performance, can avoid peeling the film during the winding process and effectively improve the work efficiency; the dielectric loss angle tacker is low and has good "Q" certifications under high frequency; no hole in stretching and bending, suitable for high speed winding; it has good solvent resistance features for solvent and hardness. GenerWater included. Application:In high frequency transformer, inductance coil, relay, engine instrument temperatures commonly used under 155. Uew is the representation of Japan

• Common sense - The diameter of the enamelled wire refers to the diameter of the bare copper wire, except the thickness of the insulating paint.
• The calliper measured by the insulated diameter of the enamelled wire is the outer diameter, including the thickness of the insulation paint, and the measured size is usually larger than the size of the standard specification.
• The product in this link is a copper wire and the spool is included. There are different colours and bobbin sizes. Please know that copper wires of 1.3 mm and above specifications are relatively thick and cannot be straightened after the wound.
• The thickened shaft is not easy to damage. The wave holes on both ends are the same size and are more convenient to use.
• When the thin copper wire is wound the coils should be placed upright, so that the copper wire falls naturally and then wound. Please note: