Labware Set 1000ml Distillation Apparatus Glass Steam Essential Oil Extraction Distillation Apparatus Water Distiller Purifier Glassware Chemistry Lab Glassware Kit (1000ml/33.81OZ)

DescriptionThis is a set of professional DIY distillation equipment for pure dew making, essential oil extraction, and distilled water making. The glassware is made of high borosilicate glass up to 300°C, which can be heated directly over an open flame and can withstand the typical laboratory thermal changes of chemical processes such as heating and cooling. This distillation set, which includes beakers, an iron stand, distillation flasks, and other professional equipment, can meet your various experimental needs.ApplicationThis distillery kit for alcohol is suitable for distillation, separation, and purification at home, school, laboratory, etc.Rose Pure Dew Refining1. Prepare 100g/0.22pounds of rose petals and 200ml/6.76oz of water ( if you want to extract more concentrated dew, you can add more petals with less water), then put it into a container, add a little salt, and stir them.2. Use a match (not included) to light the alcohol lamp and wait a few minutes (the alcohol lamp will heat more slowly) for the water to boil and the roses to lighten in color.3. Distillation of steam into the condenser tube tail pipe outflow, pure dew production success.Essential Oil Refining1. Check if the funnel is leaking.2. Pour the mixed liquid into the funnel, place the funnel on the iron ring and let it stand.3. Open the piston of the separating funnel, then open the cork so that the lower liquid (water) is released from the lower end of the separating funnel, and close the cork when the oil-water interface is tangent to the top of the cork.4. Use the glass dropper to remove the essential oil.SpecificationMaterial: High Borosilicate Glass, Iron, Latex, Rubber, PlasticColor: ClearAssembly Required: YesDistillation Flask Capacity: 1000ml/33.81OZBeaker Capacity:100ml/3.38OZ, 250ml/8.45OZPear-shaped Dispensing Funnel Capacity:100ml/3.38OZAlcohol Lamp Capacity:150ml/5.07OZConical Flask Capacity: 250ml8.45OZEssential Oil Bottle Capacity: 30ml/1.01OZSyringe Capacity: 10ml/0.33OZHeight of Iron Stand: 50cm/19.68inGlass Dropper Length: 15cm/5.9inAsbestos Net Diameter: 12.5cm/4.92inPlastic Funnel Diameter: 6cm/2.36inRubber Stopper Type: No. 5 Single HoleGross Weight: 4.45kg/9.81lbsNet Weight: 4kg/8.81lbsPackage Size: 56*38*23cm/22.04*14.96*9.05inPackage Included1*Alcohol Lamp1*Distillation Flask1*Serpentine Condenser2*Beakers1*Conical Flask1*Pear-shaped Funnel 2*Essential Oil Bottles1*Thermometer1*Glass Dropper1*Asbestos Mesh1*Plastic Funnel1*Tripod1 Pair*Gloves1*Syringe1*Flask Brush1*Latex Tube1*Rubber Stopper1*Water Stopper Clip1*BracketAll Accessories Needed for UseNotes1. Before using this product, please fix the iron frame base with nuts, then adjust the position of the iron frame and iron clamp, and connect the distillation flask and condenser tube.2. Position the sink higher than the plane of the condenser tube, then inject about 30 ml of water into the condenser tube from the inlet tube with a syringe.3. Connect the latex tube conduit and loosen the outlet latex tube stopper clip, water will flow out automatically (siphon phenomenon principle).4. Please note that the position of the mercury ball in the thermometer should be at the same level as the bottom of the nozzle and the liquid in the distillation flask should not exceed 2/3 volume or be less than 1/3 volume.5. The heating temperature should not exceed the boiling point of the highest substance in the mixture.6. Put a small number of broken porcelain tiles in the distillation flask to prevent the liquid from boiling.7. The position of the mercury ball of the thermometer should be located in the same horizontal line as the lower end of the branch pipe mouth.8. The cooling water in the condenser pipe enters from the lower port and exits from the upper port.9. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order.

• 🧪Quality Materials: The glassware in this kit are made of high-quality high borosilicate glass, while the iron stand is made of high-quality iron. These high-hardness materials make this water distiller strong, durable, and not easily damaged.
• 🧪High Safety: Low expansion rate, fire of high borosilicate glassware is not only in the temperature of sudden changes is not easy to blow up and can hold a variety of experimental materials, so you can rest assured that a variety of experiments such as open flame heating. Essential oil distiller uses knob adjusters to firmly fix the bracket, flask, and condenser, so as to prevent the joint from separating during the reaction process and keep it stable during the experiment.
• 🧪Professional Equipment: The distillation kit includes a serpentine condenser for vertical continuous distillation or reflux and an easy-to-control pear-shaped dispensing funnel, allowing you to easily complete professional experiments. The essential oil distillation kit is equipped with a glass dropper, thermometer, and clear-scaled high-transparency glassware so that you can precisely control dosage and measure the temperature and observe the experimental changes to achieve more ideal experimental results.
• 🧪Multifunctional: The steam distillation kit equipment with complete laboratory apparatus allows you to easily separate liquid mixtures, measure the boiling point of pure compounds, purification, and distillation, and many other experiments to meet the needs of laboratories, home DIY, etc.
• 🧪Large Capacity: The lab glassware range includes flasks with a capacity of 1000 ml/33.81 oz, beakers (capacity 100 ml/3.38 oz and 250 ml/8.45 oz), separating funnels (capacity 100 ml/3.38 oz) and conical flasks (capacity 250 ml/8.45 oz). The large capacity and complete container can meet different experimental requirements.