Lifehead 28000RPM Motor and ESC Cooling Fan Cooler RC Aluminum Cooling Fan for RC car 1/8 1/10 1/12 Scale 540 550 and Other Brushed/brushless Motors (red + Gold) 30 * 30mm

🥇 ▪ Product Description:1. Suitable for the motor of car model or airplane model/ship model (you need to provide your own motor fixing bracket when using) or ESC.2. Small size, light weight, with 4 M3*14mm plating screws, easy to install.3. Cooling fan can take power from receiving channel, very convenient to use. (Can also be used to take power from ESC) (Note: the line is divided into positive and negative, the red line is positive, the black line is negative. Incorrect wiring will affect the operation of the fan)4. Note: Strong magnetic motor may interfere with the operation of the fan, you need to use a special motor fixing bracket.5. Please allow slight deviation of color and measurement. Thank you for your understanding.6.Material: Aluminum (outer circumference) / Plastic (rotating piece)7.Voltage: 5-9V, Input current: 1.5A，Maximum speed: 9V/28000RPM/min🥇 ▪ Size one: 25*25*10mmCable length: 190 mm/7.48 in.Total weight: 14g/0.49ozMounting hole spacing: 20mm/0.78 inches.Recommended Use: For ESC heat sink. Screw directly onto the ESC heat sink or M3 mounting holes to draw power from the ESC or receiver channel.🥇 ▪ Size 2: 30*30*10mmCable length: 285mm/11.22 inches.Total weight: 17g/0.59 oz.Mounting hole spacing: 24mm/0.94 in.Recommended Use: For motor cooling. (For all motor mounts with 24mm mounting hole spacing / M3 screw holes).🥇 ▪ Size 3: 40*40*10mmCable length: 190mm/7.48 inches.Total weight: 25g/0.88oz.Mounting hole spacing: 32mm/1.25 inches.Recommended Use: For motor heat dissipation. (For all motor mounts with 32mm mounting hole spacing / M3 screw holes).🥇 ▪ Size IV: 50*50*10mmCable length: 180mm/7.08 inches.Total weight: 34g/1.19oz.Mounting hole spacing: 40mm/1.25 inches.Recommended Use: For motor heat dissipation.

• 🥇🥇▪ [Purchase guide]: The size of the fan is shown in the figure.It is recommended that you try to measure the size on the ESC or motor bracket of the RC car before purchasing the product. Please make sure that our fan is the correct size you are looking for to avoid returning the product and save you time.
• 🥇🥇▪ [High quality]: Adopt high heat dissipation 6061-T6 aluminum alloy CNC ultra-light housing,and the surface is anodized。 high speed and high durability ball bearing fan, perfect heat dissipation, can effectively prevent the motor or ESC from overheating. . High quality material and exquisite craftsmanship make this cooling fan can be used for a long time.
• 🥇🥇▪ [Excellent performance]: The speed can reach up to 28,000 rpm, the heat dissipation effect is excellent, and the ESC or motor is effectively protected from overheating.
• 🥇🥇▪ [Applicable models]: Compatible with the ESC or motor of model cars of various proportions, provided that you choose the right size!！！The complete range of models allows you to save a lot of time to get the radiator you need.
• 🥇🥇▪ [Quality assurance]: After the purchase is delivered, the electronic product has a 15-day quality assurance period, during which any quality problems can be fully refunded.If you are not 100% completely satisfied with our products, please do not hesitate to contact us for a refund or exchange!Your satisfaction is our top priority.